Sorry!!

I accidentally deleted the videos! Here they are again. Urgh! I hate that I have like noooo makeup on!!! I also hate that I had some issues with sound and picture being in sync and the videos not fitting on the blog correctly! I am working on it.

Feeling amazing!

I was included in one of my favorite blogs! PiinkCupcakez.com - The 411 on Everything Glam!

Thanks girlie!!

Here is the link to the post!

This blog is awesome and really fun to read, plus all the pink makes me Luuuuuv it even more!

One of my favorite things about her blog is the awesome pics of the "eyes" with the different styles and combos of eyeshadows! I could never get my eyes that perfect, but its fun to dream!

I have finally started selling on etsy! I was selling myself short, by doing all of my transactions off-line and was not able to build my reputation on etsy. I do not have a bunch listed on there yet, but will be adding a bunch over the weekend.

If I make a special piece for you, I will post it onto Esty for you to complete the transaction that way!

Thanks for all of the support!

Resin Chica

How to "seal" your decals for embedding

There are many ways to embed decals in resin. Some artists choose to buy a certain type of paper to print on, others may use preprinted pre-coated decals. My method of preference is to print the decals or pictures straight from my own color printer and then seal the decals and embed them.

Why would I need to seal the decals? If you place ordinary porous paper into resin, the resin seeps straight through it, causing transparency and picture distortion. Not good. When you seal the decal, you are preventing any resin from touching the actual paper, by forming a protective barrier.

The basics to this are simple...

excuse the unmanicured nails!! Its hard to keep good nails when you craft often.

Supplies needed- paper, scissors, Mod Podge or similar sealant, wax paper, and sponge brush.

Step 1

Print your preferred picture of decal on your printer. I can only speak for an ink jet printer but I think it should work with most.

Step 2

Cut the decal down allowing a little bit of white space surrounding the decal. This helps working with the decal easier without so much extra paper. I usually do many to a page in rows and then I cut across each row. This makes many rectangular pieces of paper which are super easy to work with.

Step 3
On top of your wax paper apply first coat of Mod Podge to front of decal. I suggest the 1 inch sponge brush because I like the way it applies and they are cheap, you may choose to use a different type. There are different Mod Podge finishes but I use the matte finish because once added into the resin, the resin creates a brilliant and shiny effect all on its own. That is why I love it!

I usually paint across the pieces only with a few brushes then I leave it to dry. I will appear "white" at first, but if your brush it as thin and evenly as you can, it will dry clear. Make sure not to over do it with the first layer, you don't want to over saturate the paper creating a "ruffling" effect.


Step 4

Once the first side is dry, flip the decal over and apply the first coat to the back, then allow to dry.

Repeat Steps 3 and 4 one more time for maximum protection.

It takes about 5 minutes to dry per side. Make sure one side is dry before flipping.

Step 5

Once all layers have been applied and are dry, cut down the decals to eliminate the extra white space surrounding the decal. Many artist use transparency when working with elaborate decals to prevent over cutting or distorting the image.

Before embedding I usually brush one last light coat of Mod Podge along the edges.

You can see an added "step" to my personal decal prepping...I'm soooooo classy!!!

All of these steps usually help to protect the decal, but it will be very obvious should the sealing not work.

I hope this is helpful! Let me know!

Happy Sealing!

Resin Chica

Decals for embedding

This weekend I am working on using printed logos/decals from my computer and sealing them to embed into rings.

I have received 3 special requests involving company logos or favorite sports teams. This is my favorite project yet. I love custom projects and the artistic freedom that comes with it. Many times people will just send me a picture via attachment and I work with it to shrink it down and print for the embedding process. Many people think that custom jobs are time consuming and boring. I think quite the opposite. I love when somone give me a piece of inspiration to go on and trusts me to create an awesome original piece.

I am experimenting more and more, with resin dyes and layering techniques, that are a little more advanced then I am use to. Once you reach a certain level of "expertise" with resin, you can not help but want to take it to the next level. The possibilities are endless and it seems like the projects just get bigger and bigger!

I am going to see if someone can help me get some pics while I prepare the logo decal rings, so that I can share them here!

Resin Chica

resin rings (41 photos), by Danielle Orozco

I'd like to share my Snapfish photos with you. Click here to view photos

Lots of pics to share...

In preparation of an upcoming event in May, I am working hard to build the inventory. Check out what I have been working on!

Resin Chica

Some bling bling...well sort of

Check out my latest batch of rings! I worked on these in 3 stages over the weekend whew! The pictures honestly do not do them any justice...not to too my own horn, but it is what it is right?

Resin Chica

These are a few of my favorite things...

Glitter makes a girl go crazy! I love using glitter in my rings and other projects I tackle. I will be working on some sets for the first time. Matching ring, bracelet, and maybe earrings. I will be donating a couple sets to different auctions, and I'm really excited about the project! I will however have to tone down the colors and amount of glitter I use, while attempting to appeal to the auction audience. Wish me luck! I will post pics, soon!!

Now I will be on my way to the kitchen to start stage 1 of some rings and 1 trial bracelet. Don't worry, I have a separate marble top counter where I do all of my resin casting, I also make sure to have the window open to ensure lots of ventilation. Remember...just because you don't necessarily smell the resin, does not mean that it's not there. I have to remind myself of that too. I also have to remind myself to always protect all surfaces I am working on. If the resin spills...it really spills! I does not come out of clothing!! I know from experience! Just take the extra step to cover everything and put on an apron or old t-shirt.

Resin Chica

St. Patty's double take!

Here are some of the rings that I made in honor of St. Patty's day for my cousin and her friend!

Ya like? Some were resin and glitter based, while others where a 3 stage casting process.

Resin Chica

Resin Epoxy Molds 411 the basics

Basic video describing some of the molds you can use when working with resin.

If your a momma too!

If you happen to be a momma too and are following me here on Resin Chica, you should check out my WAHM blog at Free2bMommy!

Hope you will visit!

Resin Chica

An easy way to sand down your resin pieces

You have created your resin pieces and pushed them out of the molds, but they are rough around the edges...literally! I have outlined below a great way to sand down your pieces to the smoothness you desire. Pics above help too!

1.) Buy a pack of mixed grit waterproof sandpaper. (You can get these at any home depot or the like)

2.) These packs have assorted grits from 220 (very fine) to 600 (ultra fine). This is the type of paper that you can use in water. Why would you want to use the sandpaper in water you ask? Using a shallow pan of water like the one above helps keep the tiny resin dust from getting in the air and into your lungs.

3.) I found that if you cut a small piece of the sandpaper and wrap it around a nail file you can maneuver it with great ease, then when you are done you can dispose of the used sand paper grit. Cutting the paper down will help you to save the areas that go unused for your next project. I have had the same pack for a while now.

4.) Try different grits and see which one give you the outcome you want. I use the 220 because I like to sand down the sides pretty good.

Resin Chica

RESIN Candy Sprinkle RINGS!

Check out my newest batch of rings!!! There are many more that I am working on!

Tell me what you think!!

Resin Chica!

Resin ring blanks

I receive my order of 50 ring blanks yesterday! I cannot begin to tell you how many resin pieces that I have completed and are waiting to be attached to the ring. The rings blanks are the jewelry piece that I get before I attach the resin pieces. I will have tons of pics soon! I have never had this many to work on at once.

I actually use resin to attach the resin piece to the ring. Unfortunately, even though resin is super strong, it does not allow the flexibility needed for an adjustable ring. I realized that the resin as the adhesive works well for attaching some pieces, but that I would need something else to attach the resin to the rings.

More on that later...

Rodeo time in Houston...

Check out my Jessica Simpson cowgirl boots! You like? The Houston Livestock and Rodeo is the largest in the world and it kicks off this weekend with the official Cookoff. The Friday before the rodeo starts is always "Go Texan" day here in Houston where we get to sport our rodeo wear to work, school, or wherever! Okay, so we Texans may still be little bit country...sure Houston is a major metropolitan city, but we have not lost the Texas twang completely! Those of us that are native Texans...never will! I will post the pics soon! Yeehaw yall!